ASTM A182 F44 round bars

 

Table of content

 

We are a well-known f44 duplex rod supplier in India, check out our current stock today!

 

F44 rod stock sizes

Round bar	A182 F44 Hex bar	Square bar
4 - 500 mm	18 - 57mm	18 - 47mm
SA 182 F44 Flat bar	Bright bar	ASTM A182 F44 Bar
2 - 150mm	4 - 100mm	5 - 500 mm

 

Finding premium quality of A182 f44 hex bar manufacturer in Chennai? send quote now and save cost, for more information check specification table

ASTM A182 F44 round bars specification

Size	Length	Conditions
Thickness: 0.5mm - 500mm diameter	100 - 6000mm	Cold drawn Polished cold drawn Centreless ground Polished
ASTM A182 F44 hardness	Tensile Strength	Yield Strength
260 max	94 KSI	43 KSI
Standard	Types	Standard
ASTM A182 ASME SA182	Rod Flat bar Hex bar Square bar	EN ASTM AISI BS JIS DIN ASME

Before you order check SA 182 f44 flat bar chemical composition and equivalent properties for your applications

SA 182 f44 forged bar applications

A182 f44 forged bar chemical composition

Grade	P	Mn	C	Si	S	N	Cr	Mo	Fe	Ni
S31254	.03 Max	1. Max	.02	.80 Max	.01 Max	-	19.5 – 20.5	6 – 6.5	-	17.5 – 18.5

SA 182 round bar equivalent properties

Standard	UNS	WNR.
ASTM A182 F44	S31254	1.4547

We offer ASTM A182 F44 stainless steel square bar in polished, annealed, bright drawn finish with ultrasonic tested per ASTM A182

A182 gr F44 rod surface finishes

CD	CG	ST	BD	CF	P&T
Cold drawn	Centreless ground	Smooth turned	Bright drawn	Cold finished	Peeled and turned
P	HF	PR	SRE	HRAP	RT
Polished	Hot finished	Peeled and reeled	Slit rolled edge	Hot rolled annealed and pickled	Rough turned/peeled

ASTM A182 F44 bar types

 

We use varoius testing methods to check quality of A182 gr F44 forged bar, check size chart

A182 gr F44 rounds size charts

 

SA 182 f44 bright bar mechanical properties

Tensile Strength (ksi) min	Yield Strength 0.2% Proof (ksi) min	Elongation (% in 50mm) min
94	43	35

F44 duplex rod tolerance

Nominal size	~ to 3	over 3 to 6	over 6 to 10	over 10 to 18	over 18 to 30	over 30 to 50	over 50 to 80	over 80 to 120	over 120 to 180	over 180 to 250
Dia (mm)
h5	+0.004/0	+0.005/0	+0.006/0	+0.008/0	+0.009/0	+0.011/0	+0.013/0	+0.015/0	+0.018/0	+0.02/0
h6	+0.006/0	+0.008/0	+0.009/0	+0.011/0	+0.013/0	+0.016/0	+0.019/0	+0.022/0	+0.025/0	+0.029/0
h7	+0.01/0	+0.012/0	+0.015/0	+0.018/0	+0.021/0	+0.025/0	+0.03/0	+0.035/0	+0.04/0	+0.046/0
h8	+0.014/0	+0.018/0	+0.022/0	+0.027/0	+0.033/0	+0.039/0	+0.046/0	+0.054/0	+0.063/0	+0.072/0
h9	+0.025/0	+0.03/0	+0.036/0	+0.043/0	+0.052/0	+0.062/0	+0.074/0	+0.087/0	+0.1/0	+0.115/0
h10	+0.04/0	+0.048/0	+0.058/0	+0.07/0	+0.084/0	+0.1/0	+0.12/0	+0.14/0	+0.16/0	+0.185/0
h11	+0.06/0	+0.075/0	+0.09/0	+0.11/0	+0.13/0	+0.16/0	+0.19/0	+0.22/0	+0.25/0	+0.29/0
h12	+0.1/0	+0.12/0	+0.15/0	+0.18/0	+0.21/0	+0.25/0	+0.3/0	+0.35/0	+0.4/0	+0.46/0

A182 f44 hex bar testing methods

• Hardness Test
• UI trasonic flaw detector
• Pitting Resistance Test
• Flattening Test
• Direct-reading Spectrograph
• Flaring Test
• Magnetic particle detector
• PMI Testing