Hastelloy C-22HS Round Bars

Hastelloy UNS N07022 Round Bar & Hastelloy C-22HS Square Bar Exporter in India.

Hastelloy C-22HS Cold Finished Bars & ASTM B637 Hastelloy Hex Bars Manucaturer

Hastelloy C-22HS Round Bar is the premier nickel-chromium-molybdenum, corrosion-resistant material for oil and gas industry use. Cold working of the alloy at levels between 30 and 65% result in high room temperature yield strengths. Hastelloy UNS N07022 Round Bar exhibits exceptional resistance to sour gas environments and is NACE/ISO approved.

C-22HS Hastelloy Alloy Cold Drawn Bars Stockholder in India

Hastelloy C-22HS Rod is available in the form of plate, sheet, strip, billet, bar, wire, pipe, and tube. Round products in the form of solid bars are available up to 10" with various amounts of cold work to achieve high strength and toughness by simultaneously retaining the excellent corrosion resistance of the alloy.

Hastelloy C-22HS Rod is available in the form of plate, sheet, strip, billet, bar, wire, pipe, and tube. Round products in the form of solid bars are available up to 10" with various amounts of cold work to achieve high strength and toughness by simultaneously retaining the excellent corrosion resistance of the alloy.

Early testing of C-22HS Alloy Forged Round Bars was focused on material in the annealed + age-hardened condition where the material was annealed at 1079°C and age-hardened at 704°C /16h/Furnace cool to 607°C / 32h/ Air-cool. In this standard condition Hastelloy UNS N07022 Round Bars will typically have strengths around 690 MPa. While this strength level is almost double of C-type alloys in the annealed condition, many oil and gas applications require even greater strength. A considerable development effort has been generated on ASTM B637 Hastelloy C-22HS Bars in three other very high strength conditions.

1) Cold Worked

2) Cold Worked + Age-Hardened

3) Low Temperature Annealed + Age-Hardened

1125°F (607°C)/10h/AC 1850°F (1010°C) 1300°F (704°C)/16h/FC to 1125°F (607°C)/32h/AC

A comparison of yield strengths for the three very high strength conditions along with that of the annealed and “standard” conditions. VIRWADIA does not recommend use of highly cold worked and aged material because the increase in yield strengths is minimal and the susceptibility to hydrogen embrittlement in severe oil well conditions is increased.

Hastelloy C-22HS Black Bars & Alloy C-22HS Forged Bar Distributors in India

Hastelloy C-22HS Round Bars Specification

Specification : ASTM B 637 / ASME SB 637

Dimensions : ASTM, ASME and API

Size : 8 - 350MM diameter

Length : 100 mm to 3000 mm Long & Above

Finish : Bright, Polish & Black

Grade : Hastelloy C-22HS (UNS No. N07022)

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Our Hastelloy C-22HS Round Bars conforms to NACE MR0175/ISO 15156

ASTM B637 Hastelloy Alloy C-22HS Bars Equivalent Grades

Get Specifications of Hastelloy C-22HS Bars Equivalent Grades & Chemical Composition

Types Of Available Products AISI, ASTM, DIN, JIS, GB, EN Hastelloy C-22HS Round Bars