Exporter of Incoloy DIN 1.4958, 1.4859 Round Bars & Incoloy 800H Bright Bar

Manufacturers of ASTM B408 800H Flat Bar & Incoloy 800HT Cold Finished Bars

VIRWADIA metal corporation (VMC) knows the importance of maintainingaluminum and titanium contents in the upper portion of the specified material range due to which higher creep and stress rupture properties Incoloy 800H / 800HT Round Bars. Therefore, to maintain higher allowable design stresses, the company introduced 1.4859 Round Bars. Incoloy 800H Bright Bar has a restricted chemistry, within the limits of alloy 800H, and requires a heat treatment of 2100°F (1149°C) minimum. The carbon is 0.06% to 0.10% the Al + Ti is 0.85% to 1.20%.

 Incoloy 800H Round Bar

Incoloy 800H Round Bars

Alloy 800HT Round Bar

Alloy 800HT Round Bars

UNS N08810 Round bar

UNS N08810 Round bar

Incoloy 800HT Hex Bars & Incoloy 800H Black Bars Stockist in India

The maximum allowable stresses for Incoloy Alloy 800H Rods are contained in ASME Code. The UNS N08810 alloy meets all the requirements for UNS N08811 and UNS N08810 and hence certified to both UNS numbers. Inconel 800H Round Bars have higher maximum allowable design stresses than UNS N08810. Therefore, other materials produced to ASTM B408 Incoloy 800HT Bars cannot be certified as UNS N08811 unless they meet the additional requirements for this designation. Incoloy UNS N08810 Round Bar is the result of years of monitoring and maintaining the ultimate properties in this series of alloys by VIRWADIA metal Corporation company, ASTM B408 Incoloy Alloy 800H Rods Manufacturer and Incoloy UNS N08811 Bright Bar Exporter.

INCOLOY alloys 800H and 800HT have significantly higher creep and rupture strength than INCOLOY alloy 800. They have nearly identical chemical composition limits that vary with carbon, aluminum and titanium. The carbon content of ASME SB 408 Incoloy 800H Forged Round Bars is 0.10% max with no limit on the lower end. The carbon content for INCOLOY alloy 800H (UNS N08810) is 0.05 to 0.10%, which is the upper end of the 0.10% maximum specified for INCOLOY alloy 800.

INCOLOY alloys SB 408 receive a high-temperature annealing treatment that produces an average grain size of ASTM 5 or coarser. The annealing treatment and restricted chemical composition are responsible for these N08811 Hex Bars having greater creep and rupture strength.

We offer a number of other outstanding features like precise dimension, high durability, superior finish, long service life, sturdy design, lightweight, and more. Meanwhile, these B408 Inconel 800HT Polish Bars are designed to function under exceptionally condition of temperature and pressure. VMC is easily adaptable to everything although it is manufacturing, supplying or packaging. We innovate ourselves technologically in the packaging systems in order to avoid the physical damage or misplacement. Our competitive edge over the other dealers and exporters is always ensuring that we provide optimum packaging solutions.

Incoloy 800H / 800HT Square Bars Stockholder in India

Incoloy 800H / 800HT Round Bars Specification

Specification : ASTM B 408 / ASME SB 408, AMS 5766

Dimensions : ASTM, ASME and API

Size : 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.

Length : 100 mm To 3000 mm Long & Above

Finish : Bright, Polish & Black

Grade : Incoloy 800H – UNS N08810, Incoloy 800HT / HT – UNS N08811

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Our Incoloy 800H / 800HT Round Bars conforms to NACE MR0175/ISO 15156

ASTM B408 Incoloy 800H / 800HT Bars Equivalent Grades

Incoloy 800H 1.4958 / 1.4876 N08810 ЭИ670 Z8NC33-21 NCF 800H NA 15(H) X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 ЭИ670 - NCF 800HT NA 15(HT) X8NiCrAlTi32-21 XH32T

Incoloy 800H / 800HT Round, Bright, Hex, Threaded Bar Chemical Composition

Grade Ni Cr Fe Si Ti Cu Mn C S Al
Incoloy 800H 30.0 - 35.0 19.0 - 23.0 39.5 min 1.0 max 0.15 - 0.60 0.75 max 1.5 max 0.05-0.1 0.015 max 0.15 -0.60
Incoloy 800HT 30.0 - 35.0 19.0 - 23.0 39.5 min 1.0 max 0.25-0.60 0.75 max 1.5 max 0.06-0.1 0.015 max 0.85-1.20

Incoloy 800H / 800HT Round Bars Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.94 g/cm3 1350-1400℃ Psi – 75,000 , MPa – 500 Psi – 30,000 , MPa – 200 30 - 35 %
Get Specifications of Inconel 800H Cold Drawn Bars Equivalent Grades & Chemical Composition

Types Of Available Products AISI, ASTM, DIN, ASME Incoloy 800H / 800HT Round Bars

Incoloy Alloy 800H Rods 
Inconel 800H Round Bars
ASTM B408 Incoloy 800HT Bars
Incoloy UNS N08810 Round Bars
ASTM B408 Incoloy Alloy 800H Rods Manufacturer
B408 Inconel 800HT Polish Bars Manufacturer
Incoloy 800HT Black Bars Distributors
Top Quality High Incoloy 800H Alloy Spring Steel Bars
Incoloy UNS N08811 Bright Bar Exporter
ASME SB 408 Incoloy 800H Forged Round Bars

800HT Incoloy Threaded Bars Stockiest in India
Alloy 800H Cold Drawn & Polished Square Bars 
Austenitic ASTM Bright Incoloy 800HT Bar
Incoloy WERKSTOFF NR. 1.4958 Round Bars
Incoloy 800HT Alloy Hexagon Bars Dealers
Inconel 800H Cold Drawn Bars Stockholder
High Speed Steel Incoloy 800H Hollow Bar Suppliers
DIN,EN,ASTM,ASME Incoloy Alloy 800HT Flat Bars
Incoloy DIN 1.4959 Alloy Round Bar
Cold Rolled Incoloy Alloy 800H Rods

whatsapp chat