Inconel X750 Round Bars UNS N07750

 

ASTM B637 Inconel X-750 Hex Bars & DIN 2.4669 Round Bars manufacturer in India

Leading distributor of X-750 Flat Bar & X-750 Inconel Square Bars in India

A shorter heat treatment for Inconel X-750 Round Bars areused if slightly lower tensile properties would be satisfactory: 1800°F/1 hour + 1400°F/1 hour, F.C. to 1150°F, hold at 1150°F for total precipitation-treating time of 6 hour. INCONEL X-750 may be given any one of a variety of heat treatments and each develops special properties and puts the product form in the best condition for its intentional application.Inconel DIN 2.4669 Round Bar is resistant to oxidation up to 1800°F. The most often used heat treatments have been incorporated by the Society of Automotive Engineers in their AMS specifications for various product forms.


Inconel X-750 Round Bar

Inconel X-750 Round Bars

X-750 Round Bar

X-750 Round Bars

ASTM B637 Inconel Round Bar

ASTM B637 Inconel Round Bar

Inconel X-750 Hot Rolled Bar & Alloy X-750 Hexagon Bars Suppliers in India

Inconel UNS N07750 Bright Bar is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300°F. With increasing temperature over 1300°F the effect of precipitation hardening is lost, heat-treated material has useful strength up to 1800°F. Alloy X-750 also has excellent cryogenic temperatures properties.

Applicable Heat Treatments 1625°F/24 hour, AC, + 1300°F/20 hour, AC (Equalizing plus precipitation treatment) for INCONEL Alloy X-750 AMS 5667 High strength and notch rupture ductility up to 1100°F. Applicable Heat Treatments 1800°F anneal + 1350°F/8 hr, FC to 1150°F, Hold at 1150°F for total precipitation-treating time of 18 hr, AC (Solution treatment plus furnace-cool precipitation treatment) for X-750 Alloy Cold Finished Bars AMS 5670, 5671, & 5747Increased tensile properties and reduced heat treating time for service up to about 1100°F.

Applicable Heat Treatments 1800°F anneal + 1400°F/1 hr, FC to 1150°F, Hold at 1150°F for total precipitation-treating time of 6 hr, AC (Solution treatment plus short furnace-cool precipitation treatment)for Inconel Alloy X-750 Rods Short furnace-cool aging. Achieves only slightly lower properties than does AMS 5670 and AMS 5671.Applicable Heat Treatments 2100°F anneal + 1550°F/24 hr, AC, + 1300°F/20 hr, AC (Triple heat treatment) for ASTM B637 Inconel X-750 Bars AMS 5668 Maximum creep, relaxation and rupture strength above about 1100°F.

Applicable Heat Treatments 1300°F/20 hr, AC (Constant-temperature precipitation treatment) High strength to 1300°F, 1350°F/8 hr, FC to 1150°F, Hold at 1150°F for total precipitation-treating time of 18 hr, AC (Furnace-cool precipitation treatment) High strength up to 1300°F (Increased tensile properties to about 1100°F) for Inconel X-750 Round Bars AMS 5542.

Inconel X-750 Black Bar & Inconel X-750 Hot Rolled Bar Stockholder in India

Inconel Alloy X-750 Round Bars Specification

Specification : ASTM B 637 / ASME SB 637, AMS 5669, AMS 5698, AMS 5699

Dimensions : ASTM, ASME and API

Size : 5 mm To 500 mm

Diameter : 0.1 mm to 100 mm

Length : 100 mm To 3000 mm Long & Above

Finish : Bright, Polish & Black

Grade : Inconel X-750 – UNS N07750

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Our Inconel X-750 Round Bars conforms to NACE MR0175/ISO 15156


ASTM B637 Inconel X-750 Bars Equivalent Grades


STANDARD WERKSTOFF NR. UNS
Inconel X-750 2.4669 N07750

Inconel Alloy X-750 Round, Bright, Hex, Threaded Bar Chemical Composition


Grade Ni Cr Al C Mn Ti Cu Si S
Inconel X-750 70.0 min 14.0 - 17.0 0.40 - 1.0 .08 max 1.00 max 2.25 - 2.75 0.50 max .50 max .01 max

X-750 Inconel Alloy Round Bars Mechanical Properties


Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.28 g/cm3 1430°C 1267 MPa 868 MPa 25 %
Visit us for ASTM B637 Inconel X-750 Bright Bar Specifications, Chemical Composition & Equivalent Grades

Types Of Available Products AISI, ASTM, DIN, ASME Inconel X-750 Round Bars

Inconel Alloy X-750 Rods
Inconel X-750 Round Bars
ASTM B637 Inconel X-750 Bars
Inconel UNS N07750 Round Bars
ASTM B637 Inconel Alloy X750 Rods Manufacturer
B637 Inconel X-750 Polish Bars Manufacturer
Inconel Alloy X-750 Black Bars Distributors
Top Quality High Inconel X-750 Alloy Spring Steel Bars
Alloy X-750 Bright Bar Exporter
ASME SB 637 Inconel X-750 Forged Round Bars

X-750 Inconel Threaded Bars Stockiest in India
Inconel Alloy X-750 Cold Drawn & Polished Square Bars 
Austenitic ASTM Bright X-750 Alloy Inconel Bar
Inconel WERKSTOFF NR. 2.4669 Round Bars
Inconel X-750 Alloy Hexagon Bars Dealers
Inconel X-750 Alloy Cold Drawn Bars Stockholder
High Speed Steel Inconel X-750 Hollow Bar Suppliers
DIN,EN,ASTM,ASME Inconel Alloy X-750 Flat Bars
Inconel X-750 Alloy Round Bar
Cold Rolled Inconel Alloy X-750 Rods

whatsapp chat